web4robot
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| USB to I2C / Serial Communication Module |
The USB to I2C module provides a complete interface between PC and the I2C bus.
The module can also be used as USB to Serial port converter to connect your peripherals to PC.
Its compact size and convenient features make it an ideal tool for your projects.
 | Mini USB connector and Full-speed 12 Mbps USB-to-Serial converter. | |
| Support the dual interface: standard 100Kbps I2C interface and 9600Kbps Serial | |
| interface. | ||
| The module is a master for I2C bus. | |
| On-board 28 pin socket for FLEXEL chip connection. | |
| 26 pin connector for FLEXEL inputs/outputs. | |
| 5 pin connector for I2C/Serial bus. | |
| On-board the pull up resisters for I2C bus. | |
| 2 LEDs to indicate USB traffic. | |
| The module is self powered from the USB and can supply up to 50mA at 5V for external | |
| circuitry. | ||
| Small form factor 2.6" x 0.9" (66 x 23 mm). |
| Read/Write single byte for non-registered devices (as I/O Expanders). | |
| Read multiple bytes without setting new address (as the pressure sensors, ADC, etc). | |
| Read/Write single or multiple bytes for 1 byte addressed devices (as EEPROM with 1 | |
| byte address, etc). | ||
| Read/Write single or multiple bytes for 2 byte addressed devices (as EEPROM with 2 byte | |
| address). | ||
| The full range of commands for FLEXEL chips. |
Click here for USB to I2C Module Manual.
| 2 in 1 |
